Enjoying The Sounds - Technics SA-DA10 Operating Instructions Manual

Technics av control stereo receiver sa-da10, sa-da8
Hide thumbs Also See for SA-DA10:
Table of Contents

Advertisement

1
1
2
SPEAKERS
A
B
3
4
DIGITAL INPUT
5
DSP SOUND MODE
22
RQT5518
2
5
3 4
DIGITAL
BI-WIRE
SPEAKERS
A
INPUT SELECTOR
PHONO
TUNER
TAPE/MD
VCR 2
(TAPE)
S
PROGRAM FORMAT
L
LS
SOUND MODE

Enjoying the sounds

Preparation: Set [VOLUME] to the "MIN" position.
1
Press [
2
Select the speaker system(s) to be
used.
A, B and BI-WIRE refer to the speaker terminals at the rear
of the unit.
BI-WIRE and A, or BI-WIRE and B cannot be used at the
same time.
"SURROUND" and "SFC" cannot be turned on if [B] is
pressed.
If the button is pressed once more, the indicator will switch
off and no sound will be heard from the speakers.
3
Turn [INPUT SELECTOR] to select
desired source.
(Refer to the appropriate operating instructions for details.)
Each time the selector is turned the display switches.
Note
Turn on the TV and select the input mode to suit the source
(e.g. TV, VIDEO).
4
(only if you select TV, CD or DVD in the above step)
Press [DIGITAL INPUT] to select the
desired input mode.
Each time you press the button, the display switches as
follows.
DIGITAL
The "DIGITAL" indicator lights when "DIGITAL" selected.
5
Press [DSP SOUND MODE] to select
the desired mode.
The SOUND MODE indicator corresponding to the selected
mode lights and that mode is displayed.
CD
DVD
Note
¡Be sure to select the mode appropriate to the source you
VCR 1
TV
are playing (a pages 20 and 21).
¡Dolby Digital and DTS sources cannot be played with the
SFC modes.
(Continued on next page)
C
R
S
LFE
RS
SURROUND
/l].
ANALOG

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sa-da8

Table of Contents