Making A Recording.24; Recording On The Tape Deck; Recording On The Vcr - Technics SA-AX910 Operating Instructions Manual

jTAPE MONITOR]
3
BCTAl-H.IM.ai.KHW
TV/VCR 2
I TVmVCR 2
[TAPE MONITOR];
I t«pe MQNrroRj )
BH1
| )
Making a recording
_j
tm
When you select 6CH DISCRETE INPUT mode, only sound from
the front left and right speakers is recorded.
To record all 6 channels, switch to a 2 channel output mode.
For details, see the instruction manual that came with the connected
j equipment.
Recording on the tape deck EJ
Before recording, prepare the tape deck for recording (recording
level adjustment, etc.).
See the tape deck's operating instructions for details.
Select the desired source to be recorded.
Press any button except [ TAPE MONITOR I to select the
source you want to record from.
Ei KSEBU]
(only if you press TV/VCR 2 in the above step)
Set TV/VCR 2 (
m
.
TV VCR 2) to "
j*.
TV" or
VCR 2" position.
El
■El Begin recording.
Follow your tape deck's operating instructions.
i
To check the sound recorded while a recording is being
made B
With a tape deck with 3 head system, it is possible to check the
sound recorded on the tape.
Press [ TAPE MONITOR 1 on this unit and set the monitor but¬
ton on the tape deck to "TAPE".
Press [TAPE MONITOR | once again to turn it off.
Recording on the VCR
Before recording, prepare the VCR (VCR 1) for recording (recording
level adjustment, input selector setting, etc.).
See the VCR's operating instructions for details.
Select the desired source to be recorded.
Press any button except VCR 1 and fTAPE MONITOR I to
select the source you want to record from.
(only if you press TV/VCR 2 in the above step)
Set TV/VCR 2 (TV VCR 2) to " TV" or " ~
VCR 2" position.
Begin recording on the VCR 1.
Follow your VCR's operating instructions.
Begin the desired source to be recorded.
Follow your equipment's operating instructions.
For your reference
There are VCR 2 terminals at the front of this unit.
It is easier to carry out dubbing from a camcorder if it is connected
to the front terminals.
24