Using The Modify Button - Breville the Custom Loaf BBM800 Instruction Book

PAge heAder..... OPTIONAL SETTINGS – MOdIFy BUTTON
LCD screen will display 'READY IN' and begin to count
down. There will be no movement inside the bread pan. Once
the correct time has lapsed, the cycle will automatically begin.
The LCD screen will indicate the time remaining until the
loaf is ready and the progress indicator will flash to indicate
the current phase of the cycle.

Using the MOdIFy button

The preset, recommended temperature and times for the
'preheat', 'knead', 'rise', 'punch-down', 'bake' and 'keep warm'
phases can be modified to suit a specific recipe or your personal
preference. For example, if you like a crustier loaf, the baking
temperature and time can be increased.
NOTE
The modified temperatures and times will not be stored
in the memory of the bread maker. Instead, the bread
maker will return to its default temperatures and times
after the modified cycle has finished. To store the
modified temperatures and times, refer to 'Using the
CUSTOM setting', page 33.
1. Using the SELECT push-dial, select the desired setting,
crust colour and loaf size. Refer to Steps 1-9, 'Operating your
Breville Bread Maker – Beginners Guide', page 11.
2. Before pressing the START | PAUSE button to activate the
cycle, press the MODIFY button. The LCD screen will display
the progress indicator and flash to indicate the phase that can
be modified, as well as its preset temperature/time. Use the
SELECT push-dial to modify the preset temperature and/or
times for each of the phases.
3. Once all the phases have been modified to suit your
preferences, the LCD screen will indicate the new cycle time.
Press the START | PAUSE button to activate the cycle.
NOTE
If using the modify function, all phases must be either
modified or verified. ie; If you do not go through all phases
and push start or cancel the program will not keep the
modified input.
NOTE
Phases can only be modified if they are already applicable
to a setting. For example, the BAKE ONLY setting does not
have a 'knead' phase, so this phase cannot be modified.
31