Pro-Form 10.8X User Manual page 16

HOW TO USE A HEART RATE WORKOUT
1. Press any button on the console or begin
pedaling to turn on the console.
A few seconds after the console is turned on, the
displays will light. A tone will then sound and the
console will be ready for use.
2. Select a heart rate workout.
To select a heart rate workout, press either of the
Heart Workouts buttons on the left side of the con-
sole.
If you select
heart rate
workout 1, a
heart rate sym-
bol will appear
in the left dis-
play.
If you select
heart rate
workout 2, a
profile of the
target heart
rate settings of
the workout will
scroll across
the left display
and the workout time will appear in the upper dis-
play.
3. Enter a target heart rate setting.
If you select heart rate workout 1, the target
heart rate setting for the workout will flash in the
lower display. If desired, press the increase and
decrease buttons in the upper left corner of the
console to change the target heart rate setting
(see EXERCISE INTENSITY on page 19). Note:
The same target heart rate setting will be pro-
grammed for all segments.
All manuals and user guides at all-guides.com
Profile
16
If you select heart rate workout 2, the maximum
target heart rate setting of the workout will flash in
the lower display. If desired, press the increase
and decrease buttons in the upper left corner of
the console to change the maximum target heart
rate setting (see EXERCISE INTENSITY on page
19). Note: If you change the maximum target heart
rate setting, the intensity level of the entire work-
out will change.
4. Hold the handgrip pulse sensor.
It is not necessary to hold the handgrips continu-
ously during the workout. However, you should
hold the handgrips frequently for the workout to
function properly. Each time you hold the hand-
grip pulse sensor, keep your hands on the
metal contacts for at least 30 seconds.
5. Press the Workout Start button to start the
workout.
The heart rate workout 1—This workout is
divided into 40 one-minute segments. The same
target heart rate is programmed for all segments.
Note: For a shorter workout, stop exercising or
select a different workout before the workout ends.
The heart rate workout 2—This workout is
divided into 30 one-minute segments. One target
heart rate setting is programmed for each seg-
ment. Note: The same target heart rate setting
may be programmed for consecutive segments.
During the workout, the workout profile will show
your progress (see the drawing at the left). The
flashing segment of the profile represents the cur-
rent segment of the workout. The height of the
flashing segment indicates the target heart rate
setting for the current segment. At the end of each
segment of the workout, a series of tones will
sound and the next segment of the profile will
begin to flash.