Internal Rewinder Installation
STEP
PROCEDURE
9.
Attach Cable Stay to frame. Connect the cable from the guide plate unit
into CN10 on the Main PC Board. Make sure the cable does not touch the
motor pulley. .igs. 11
10.
Attach (4) Blade Springs to spindle with screws provided. Position roll
holder to spindle. .igs. 12
11.
Replace the side cover and secure with screws previously removed.
12.
Install labels per .igs. 13 & 14.
ATTACH CABLE STAY TO
FRAME. ROUTE CABLE
FROM GUIDE FRAME UNIT
TO PC BOARD AT CN10
CONNECTOR
8
All manuals and user guides at all-guides.com
Figs. 11
ATTACH (4) BLADE
SPRINGS WITH
SCREWS PROVIDED
Figs. 12
ROLL HOLDER
SATO CL-408e Internal Rewinder