Internal Rewinder Installation
STEP
PROCEDURE
1.
Remove (2) screws to detach the tear bar. Retain the screws.
2.
Remove and retain screw from under the front access door latch.
Route the cable from the Guide .rame Unit through the hole in
the side wall and secure unit with (3) screws as shown. .igs. 3
ATTACH GUIDE FRAME
UNIT WITH SCREWS
4
All manuals and user guides at all-guides.com
TEAR BAR
ROUTE CABLE
THROUGH HOLE
IN SIDE WALL
IN THREE PLACES
SATO CL-408e Internal Rewinder
REMOVE SCREW AND
RETAIN FOR THE
GUIDE FRAME UNIT
Figs. 3