SATO CL408e User Manual page 7

Internal Rewinder Installation
STEP PROCEDURE
7. Route and attach the belt from the idler gears to the stepper motor.
Reattach the motor belt previously removed. Tighten the motor mounting
screws. .ig. 9
8. Attach Adjust Plate Unit to the Sub .rame Unit with (2) screws. Attach
the tension spring. Adjust the belt tension as necessary with the
adjustment screw. .ig. 10
ATTACH ADJUST PLATE UNIT
TO THE SURFACE OF SUB
FRAME UNIT WITH (2)
SCREWS AS SHOWN.
All manuals and user guides at all-guides.com
ADJUSTMENT SCREW -
FOR ADJUSTING BELT
Fig. 10
SATO CL-408e Internal Rewinder
ROUTE AND ATTACH THE BELT
FROM THE IDLER GEARS TO
THE STEPPER MOTOR SHAFT.
REATTACH THE MOTOR BELT
PREVIOUSLY REMOVED.
TIGHTEN THE MOTOR MOUTING
SCREWS
Fig. 9
TENSION
ATTACH
SPRING
BE SURE THE BELT IS
ENGAGED ON THE
GEAR OF THE ADJUST
PLATE UNIT
7