SATO CL408e User Manual page 5

Internal Rewinder Installation
STEP PROCEDURE
3. Remove (4) screws to detach the access plate. Retain the screws. .ig. 4
4. Gently guide the Rewind Shaft Unit through the access opening. Note the
correct orientation of the bracket on the unit. Attach the rewind shaft unit with
screws previously removed from the access plate. .igs. 5 & 6
Fig. 4
REMOVE AND
RETAIN (4) SCREWS
ATTACH THE REWIND
SHAFT UNIT WITH
(4) PREVIOUSLY
REMOVED SCREWS
All manuals and user guides at all-guides.com
ACCESS PLATE
SATO CL-408e Internal Rewinder
GENTLY GUIDE THE REWIND
SHAFT UNIT THROUGH THE
ACCESS OPENING. NOTE
THE CORRECT ORIENTATION
OF THE BRACKET ON THE
REWIND SHAFT IN THE
ELECTRONICS SIDE
Fig. 5 ELECTRONICS SIDE
Fig. 6
5