SATO CL408e User Manual page 6

Internal Rewinder Installation
STEP PROCEDURE
5. Loosen (2) screws holding the stepper motor and detach the belt. .ig. 7
6. Attach the sub frame unit to the bracket on the rewind shaft unit. Note the
locating pins. Route the timing belt in position as shown, then secure the
bracket with screw. .igs. 8
SCREWS HOLDING
AND DETACH BELT
LOCATING PINS
ROUTE THE BELT AROUND IDLER
GEARS ON SUB FRAME UNIT AS
SHOWN. PLACE THE SUB FRAME
UNIT ON THE REWIND SHAFT UNIT
BRACKET. THERE ARE (2)
LOCATING PINS ON THE BRACKET.
SECURE WITH SCREW
6
All manuals and user guides at all-guides.com
LOOSEN (2)
STEPPER MOTOR
SATO CL-408e Internal Rewinder
GEAR ON REWIND
SHAFT UNIT
Figs. 8
Fig. 7
IDLER GEARS
ON SUB FRAME
UNIT
BELT ROUTING