Stihl MS 192 T Instruction Manual page 49

English
Definitions
1. Carburetor Box Cover Twist Lock
Lock for carburetor box cover.
2. Carburetor Box Cover
Covers the air filter and the
carburetor.
3. Carburetor Adjusting Screws
For fine tuning the carburetor.
4. Control Handle
The support handle for the right
hand, located at or toward the rear
of the saw.
5. Throttle Trigger Interlock
Must be depressed before the
throttle trigger can be activated.
6. Master Control Lever
Lever for starting throttle, run and
stop switch positions.
7. Throttle Trigger
Controls the speed of the engine.
8. Chain Brake
A device to stop the rotation of the
chain if activated in a kickback
situation by the operator's hand or
by inertia.
9. Chain Sprocket
The toothed wheel that drives the
saw chain.
10. Chain Sprocket Cover
Covers the clutch and the sprocket.
48
11. Spark Plug Boot
Connects the spark plug with the
ignition wire.
12. Muffler
Reduces engine exhaust noise and
directs the exhaust gases.
13. Chain Tensioner
Permits precise adjustment of chain
tension.
14. Chain Catcher
Helps to reduce the risk of operator
contact by a chain if it breaks or
comes off the bar.
15. Guide Bar
Supports and guides the saw chain.
16. Oilomatic Saw Chain
A loop consisting of cutters, tie
straps and drive links.
17. Bumper Spike
Toothed stop for holding saw steady
against wood.
18. Fuel Filler Cap
For closing the fuel tank.
19. Oil Filler Cap
For closing the oil tank.
20. Hand Guard
Provides protection against
projecting branches and helps
prevent left hand from touching the
chain if it slips off the handle bar.
21. Handlebar
Handle bar for the left hand at front
of saw.
22. Starter Grip
The grip of the starter, for starting
the engine.
23. Choke Lever
Eases engine starting by enriching
mixture
24. Fuel Pump
Provides additional fuel feed for a
cold start
25. Ring
Pull-out ring for attaching rope.
Guide Bar Nose
The exposed end of the guide bar.
(not illustrated, see chapter
"Tensioning the Saw Chain")
Clutch
Couples engine to chain sprocket
when engine is accelerated beyond
idle speed. (not illustrated)
Anti-Vibration System
The anti-vibration system includes a
number of buffers designed to
reduce the transmission of
vibrations created by the engine
and cutting attachment to the
operator's hands. (not illustrated)
MS 192 T