Stihl MS 192 T Instruction Manual page 30

: Pull the hand guard back toward
the handlebar:
The chain brake is now disengaged
– your saw is ready for operation.
Always disengage chain brake
before accelerating engine. High
revs with the chain brake engaged
(chain locked) will quickly damage
the engine and chain drive (clutch,
chain brake).
: Observe safety precautions.
: Always check operation of chain
lubrication before starting work.
MS 192 T
At very low outside temperatures
Allow the engine to warm up.
As soon as the engine runs:
: Blip the throttle trigger to disengage
it from starting throttle position –
Master Control lever moves to run
position # and the engine settles
down to idling speed.
: Disengage chain brake:
Pull the hand toward the handlebar
as shown.
: Open throttle slightly – warm up
engine for short period.
To shut down the engine
: Move the Master Control lever to 0
or STOP.
.
If the engine doesn't start
If fuel tank has been run dry and then
refueled
: After fueling, press the fuel pump
bulb at least five times – even if the
bulb is already filled with fuel.
Engine is flooded
If you did not move the choke lever to j
(warm start) quickly enough after the
engine began to fire, the combustion
chamber is flooded.
: Set the Master Control lever to 0 or
STOP.
: Open the twist lock (1) in the
direction of the arrow.
: Remove the filter cover (2).
English
29