Applying The Compressor While Recording - Tascam SS-R1 Owner's Manual

Applying the compressor while recording

You can apply the SS-R1's built-in compressor to the
recording source while you record.
A compressor is an effect that holds down peaks in the
audio, making the overall level more consistent and more
listenable.
You'll use the menu to turn the compressor on/off (for
details on menu operations, refer to "Operations in the
menu screens" on page 16).
1 Press the key to access the main menu list
MENU
screen.
2 Select the REC menu.
3 Highlight the PREFERENCE item.
4 Press the front panel
˚
key) to proceed to the REC PREF-
CURSOR ¥
ERENCE screen.
5 Select COMP.
key (or the remote's
6 − Recording
6 Turn the dial (or use the remote's
MULTI JOG
keys) to select one of the follow-
CURSOR § , ¶
ing as the compressor mode.
: The compressor will not be used when recording.
OFF
: Light compression will be applied. This setting
SOFT
is suitable when recording music.
: Strong compression will be applied. This setting
HARD
is suitable when the audio source you're recording has a
low volume. Since the recording volume will be boost-
ed, it is also suitable when recording a meeting or con-
ference.
7 When you've finished making settings, press the
front panel
TIME (ESC)
key) to return to the home screen.
CLR/ESC
NOTE
This setting is remembered even when you turn off
the power.
key (or the remote's

TASCAM SS-R1