Tascam CD-01U Specifications page 14

4-20. REPEAT SELECT
Sets the Repeat mode.
When this command is transmitted with request data [FF], the controlled device returns the REPEAT
SELECT RETURN command [B7].
Command
Data
Return
Data 1 Data 2 Description
0 0 Repeat Off
0 1 Repeat On
F F Repeat mode status request
· If the specified data is other than described above, the controlled device sends ILLEGAL [F2].
4-21. INCR PLAY SELECT
Turns the Incremental Play mode on and off.
When this command is transmitted with request data [FF], the controlled device returns the INCR PLAY
SELECT RETURN command [BA].
Command
Data
Return
Data 1 Data 2 Description
0 0 Incremental Play Off
0 1 Incremental Play On
F F Incremental Play function status
request
· If the specified data is other than described above, the controlled device sends ILLEGAL [F2].
4-22. FADE IN/OUT SELECT
Sets the Fade in/out mode.
When this command is transmitted with request data [FF], the controlled device returns the FADE
IN/OUT SELECT RETURN command [BE].
Fade In and Out time are set using the FADE IN/OUT TIME PRESET command [2E].
Command
Data
Return
Data 1 Data 2 Description
0 0 Fade In Off / Fade Out Off
0 1 Fade In On / Fade Out Off
1 0 Fade In Off / Fade Out ON
1 1 Fade In On / Fade Out On
F F Fade In/Out status request Requests the Fade In/Out mode status
· If the specified data is other than described above, the controlled device sends ILLEGAL [F2].
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications
37
2 bytes
REPEAT SELECT RETURN [B7]
3A
2 bytes
INCR PLAY SELECT RETURN [BA]
3E
2 bytes
FADE IN/OUT SELECT RETURN [BE]
Remarks
14
Remarks
Turns the repeat mode off
Turns the repeat mode on
Requests the repeat mode status
Remarks
Turns the Incremental Play function off
Turns the Incremental Play function on
Requests the Incremental Play function
status
TEAC Corporation