Display - Tascam CC-222MK Owner's Manual

Display

( )
O PA
This display shows various types of operation informa-
tion, including CD disc information, deck operation
modes, and menu status.
Tape PLAY Lights when a tape is being played back
(
or recording.
(Tape-running indicator) Shows the direction
˙/¥
)
of a tape during playback or recording.
Tape PAUSE (π) Lights when the unit is in standby
Q
mode for tape playback or recording.
Lights during tape recording or recording
T ape REC
W
standby mode.
Tape Counter display
E
incremented when the tape is moving from left to
right, and decremented when it moves from right to
left (See "Tape counter" on page 32 for more details).
Displays the playback level and
Tape Level meter
R
the input level of the source device for recording
operation.
TAPE, CD In the CD-TAPE CONT PLAY mode
T
(continuous CD/tape playback), on of these will flash
during playback.
INPUT 2 This is always displayed except when
Y
recording with the PHONO
LINE 2, DISC display
U
available for INPUT 2 (Tape deck).
liNe 2
: a signal source is connected to
Disc
: a signal source is connected to internal CD drive.
DUB 1, 2 When dubbing a tape to a CD-RW, the
I
indicator "Dub 1" lights up. When dubbing a CD-RW
to a tape, indicator "Dub 2" lights up.
Either TOTAl or ReMAiN is lit. When
Counter display
O
both indictors are off, the time mode is set to show
the elapsed time of the current track.
D isc information display NO TOC
P
disc does not contain TOC (Table of Contents) data.
CD , CD-R or CD-RW
TOC data is loaded.
2- Features of the CC-222
Q W E
DF G H J K
S
The tape counter value is
key.
Shows the different sources
LINE INPUT 2
Lights when a
lights up when a disc with
R
L
( ) Lights during disc playback.
C D PLAY
A ¥
(
CD PAUSE
S π
standby mode.
CD REC Lights during disc recording or recording
D
standby mode.
S YNC Lights when the SYNC recording mode is on.
F
REPEAT, A-B display
G
on, "RePeAT" is lit. When the A-B Repeat function is
on, "RePeAT" and "A-b" are lit. "A-b" also blinks until a
"B-point" is entered.
S I N G L E , R A N D O M , P R O G R A M d i s p l a y
H
Depending on the playback mode selected. When all
the indicators are off, Continuous playback mode is
on.
Character display
J
message, time, and operation status are displayed.
CD Level meter
K
source level when recording.
MUSIC CALENDER
L
light up; played back tracks disappear from the
screen. When there are more than 20 tracks available
for playback, the "OVeR" indicator lights up.
A·SPACE Lights when the Auto Space function is
:
on.
Lights when the Auto Track function is
A·TRACK
Z
on. The indicator blinks when Time mode is select-
.
ed.
INPUT 1 This is always displayed except when
X
recording with the
O PTICAL, COAXIAL, LINE 1, PHONO, TAPE display
C
Shows the different sources available for
(CD drive).
OPTicAl
: Input source is connected to
cOAXiAl Input source is connected to
:
liNe 1 Input source is connected to
:
PhONO Input source is connected to
:
TAPe Input source is connected to internal tape deck.
:
MK
T Y U I
: ZX C
) Lights during playback or recording
When the Repeat function is
Disc or track information, menu,
Displays the playback or input
Available tracks for playback
PHONO key.
OPTICAL
COAXIAL
.
LINE 1
PHONO
TASCAM CC-222MKIII
$
INPUT 1
.
.
.
1