Playback Modes; Random Playback; Program Playback - Tascam CC-222MK Owner's Manual

Playback modes

The unit can be set to play back a single track, the
whole disc in the created order, the tracks of the disc in
a random (shuffled) order, or a programmed order. This
operation takes place when stopped.
NOTE
Selecting the playback mode is only possible using
the remote control unit.
1 When stopped, press the
remote control repeatedly to cycle the display
through the following:
• Normal playback mode. Playback con-
Continue.
tinues in the normal order.

Random playback

In this mode, the unit will playback all the tracks on the
disc in random order.
1 When stopped, press the
the display shows
Random
2 Press the PLAY key to start random playback.
While playing back, using the track skip func-
tion will move forwards through the random

Program playback

The steps to set up to 99 program steps (tracks) to be
played back in a specified order are as follows:
1 When stopped, press the
the display shows
Program
2 The display changes to show
meaning that there are no tracks assigned for
program playback.
3 Use the number keys on the remote control to
enter a track number. There is no need to press
the key.
ENTER
The track entered is assigned to the program
step, and the display changes, showing the track
number, the total time of the program so far, and
the step number, e.g.
4 The next program step can then be entered.
NOTE
Steps 3 and 4 above can also be carried out from
the main unit by turning and pushing the MULTI
DIAL key.
5 Repeat steps 3 and 4 above until the program is
complete.
6 Press the PLAY key to start playback at the first
program step.
PLAY MODE key on the
key until
PLAY MODE
.
PLAY MODE key until
.
,
0Tr 00:00 00
.
2Tr 14:56 03
4- Disc operations Disc operations
• The currently selected track is played and
Single.
then playback stops. The SINGLE indicator lights in
this mode.
• In this mode, all the tracks on the disc are
Random.
played in random order, and the RANDOM indicator
lights (see "Random playback" on page 17 below).
• The PROGRAM indicator lights in this mode
Program.
(see "Program playback" on page 17 below).
The selected mode is shown in large characters dis-
appears from the display a few seconds after selecting
the mode, and the display returns to its previous mode.
order. Turn the
MULTI DIAL
wise or press the SKIP
control.
NOTE
You cannot go backwards to previous tracks in the
Random playback mode.
To stop random playback, press the
the disc tray also stops random playback.
The display shows the track, the current time dis-
play, and the program step number.
While in program playback mode, using the
keys or the MULTI DIAL
forwards in the order set in the program.
Use the PAUSE key to stop playback temporarily or the
STOP key to stop playback of the program. If the
key is used, when playback is restarted, it starts from
the first program step.
When stopped, if the
CLEAR
is pressed, it cancels the last track entered in the pro-
gram.
Clear the program by pressing the
until the display shows
Continue
also cleared when the disc tray is opened, and if the
key is pressed when playback is stopped in pro-
STOP
grammed order mode.
The programmed play order is not memorized when the
power is turned off.
If you enter more than 99 program steps, the message
appears on the display.
PGM Full !
If the total time programmed goes over 100 minutes,
the message appears on the display.
--:--
on the unit clock-
( ) key on the remote
¯
STOP key. Opening
SKIP
moves backwards and
STOP
key on the remote control
PLAY MODE
. The program is
1
TASCAM CC-222MKIII