Table of Contents
Advertisement
2
Turn the palm-rest assembly over.
3
Remove the two screws (M2x3) that secure the graphics card cables on the system board.
4
Lift the two graphics card cables off the system board.
5
Peel the tape that secures the audio daughter-board cable to the system board.
6
Open the latch and disconnect the audio daughter-board cable from the system board.
7
Open the latch and disconnect the touchpad cable from the system board.
8
Open the latch and disconnect the keyboard cable from the system board.
9
Remove the two screws (M2.5x5) that secure the system board to the palm-rest assembly.
10 Lift the system board off the palm-rest assembly along with the right power-adapter port.
87
Advertisement
Table of Contents
