Table of Contents
Advertisement
Identifier
Status
Ricollocamento degli altoparlanti
AVVERTENZA: Prima di effettuare interventi sui componenti interni del computer, leggere le informazioni sulla
sicurezza fornite con il computer e seguire la procedura in
computer. Dopo gli interventi sui componenti interni del computer, seguire le istruzioni descritte in
interventi sui componenti interni del
sicurezza, consultare la home page Conformità alle normative su www.dell.com/regulatory_compliance.
Identifier
Status
Procedure
N.B.: If the rubber grommets are pushed out of the speakers when removing the speakers, push them back in place
before replacing the speakers.
1
Using the alignment posts and rubber grommets, place the right speaker in the slot on the palm-rest assembly.
2
Holding the tab on the right speaker, rotate the right speaker into place and secure it using the alignment posts.
3
Route the speaker cable through the routing guides on the palm-rest assembly.
4
Using the alignment posts and rubber grommets, place the left speaker in the slot on the palm-rest assembly.
5
Holding the tab on the left speaker, rotate the left speaker into place and secure it using the alignment posts.
50
GUID-40DC76F7-B3EC-450A-848E-632D68C352E2
Translated
computer. Per maggiori informazioni sulle procedure consigliate relative alla
GUID-20286750-2B67-424E-860B-BBC3F5758ECD
In Translation
Prima degli interventi sui componenti interni del
Dopo gli
Advertisement
Table of Contents
