Identifier
Status
Rimozione del gruppo dello schermo
AVVERTENZA: Prima di effettuare interventi sui componenti interni del computer, leggere le informazioni sulla
sicurezza fornite con il computer e seguire la procedura in
computer. Dopo gli interventi sui componenti interni del computer, seguire le istruzioni descritte in
interventi sui componenti interni del
sicurezza, consultare la home page Conformità alle normative su www.dell.com/regulatory_compliance.
Identifier
Status
Prerequisites
1
Remove the
base
cover.
2
Remove the
wireless
3
Remove the
rear-I/O
Identifier
Status
Procedure
1
Remove the screw (M2x3) that secures the display-cable bracket to the system board.
2
Lift the display-cable bracket off the system board.
3
Using the pull tab, disconnect the display cable from the system board.
4
Disconnect the camera cable from the system board.
5
Peel off the display cable and the camera cable from the computer base.
6
Disconnect the tobii cable from the system board.
7
Remove the antenna cables from the routing guides on the computer base.
8
Peel off the tobii cable from the computer base.
60
GUID-AB1F153B-621B-42FC-89BE-0E1105FF1786
Translated
computer. Per maggiori informazioni sulle procedure consigliate relative alla
GUID-44BCE817-EFC5-4F1C-91EC-64939CB8F480
In Translation
card.
cover.
GUID-97F53FD7-BE96-4A31-B1B2-4FF3967E425C
In Translation
Prima degli interventi sui componenti interni del
Dopo gli