Table of Contents
Advertisement
MXP Series Video Endpoints
What's in this guide?
Getting started
Text chatting in video calls
Use your video system to send and receive text messages while in a call
Y
ou may use your video system to
send and receive text messages
using the chatting function available.
All you need to do is to select the Text
Chat function and use the keypad as
you would when sending text messages
(SMS) using your mobile phone.
Observe the following:
• Once you enter Text Chat mode, the
dialog box expects alphanumerical
entries via the remote control.
• This will not work unless the far side
a) supports text chat, and
b) has activated that feature.
• Text chatting applies to point-to–point
video meetings only.
Using the number keys in text
fields
Whenever text entries are expected
by the system, a small abc or ABC
appears in the right lower corner of the
entry field. For entry fields expecting
numbers, 123 will appear instead. In
text mode, entries from the number
keys are automatically interpreted as
text entries in the same way as on a
mobile phone.
Guidelines:
•
Press the key that corresponds to
the required letter as many times as
needed to produce that letter.
•
Switch between lower case (abc)
and upper case (ABC) letters with
the # a/A key.
D1479201 MXP Series User Guide, May 2011.
© 2010-2011 Cisco Systems, Inc. All rights reserved.
Making calls
•
Switch between text mode (abc) and
number mode (123) by keeping the
# a/A key depressed for more than
a second.
•
To insert space, press the 0 _ key.
•
To insert the @ sign, press the 1-key
twice, while the keypad is in text
mode.
•
To insert the . sign, press the
*
.-key
once, while the keypad is in number
mode.
•
To write digits and numbers in a
text input field, repeatedly press
the corresponding key until the digit
appears.
Using the phonebook
In-call features
In-call features
Chatting with the other party...
1.
In a call press the OK key to display
the menu and navigate to Services.
2.
Navigate to the Text Chat icon.
3.
Press the OK key and start your
text chatting by pressing the keys
on the remote control.
4.
Press the OK key to end the chat
and return to the Services menu.
46
User Guide
Videoconferencing
Contact us
www.cisco.com
Advertisement
Table of Contents
