Session; Snmp; Ssh; Subzones - TANDBERG Gatekeeper User Manual

16.2.14.

Session

xconfiguration Session TimeOut: <0..65534>
Controls how long an administration session (HTTPS, Telnet or SSH) may be inactive before the session
is timed out. A value of 0 turns session time outs off. The default is 0. You must restart the system for
changes to take effect.
16.2.15.

SNMP

xconfiguration SNMP CommunityName: <name>
SNMP Community names are used to authenticate SNMP requests. SNMP requests must have this
'password' in order to receive a response from the SNMP agent in the Gatekeeper. You must restart the
system for changes to take effect.
xconfiguration SNMP Mode: <On/Off>
Turn on/off SNMP support. You must restart the system for changes to take effect.
xconfiguration SNMP SystemContact: <name>
Used to identify the system contact via SNMP tools such as TANDBERG Management Suite or HP
OpenView. You must restart the system for changes to take effect.
xconfiguration SNMP SystemLocation: <name>
Used to identify the system location via SNMP tools such as TANDBERG Management Suite or HP
OpenView. You must restart the system for changes to take effect.
16.2.16.

SSH

xconfiguration SSH Mode: <On/Off>
Enables/disables SSH and SCP support. You must restart the system for changes to take effect.
16.2.17.

Subzones

xconfiguration SubZones DefaultSubZone Bandwidth PerCall Limit:
<1..100000000>
Per call bandwidth of the default subzone.
xconfiguration SubZones DefaultSubZone Bandwidth PerCall Mode:
<None/Limited/Unlimited>
Whether or not the default subzone is enforcing total bandwidth restrictions. None corresponds to no
bandwidth available.
xconfiguration SubZones DefaultSubZone Bandwidth Total Limit:
<1..100000000>
Total bandwidth available on the default subzone.
xconfiguration SubZones DefaultSubZone Bandwidth Total Mode:
<None/Limited/Unlimited>
Whether or not the default subzone is enforcing per-call bandwidth restrictions. None corresponds to no
bandwidth available.
TANDBERG Gatekeeper User Guide
Page 79 of 105