16. Command Reference
This chapter lists the basic usage of each command. The commands also support more advanced
usage, which is outside the scope of this document.
16.1.
Status
The status root command, xstatus, returns status information from the Gatekeeper.
16.1.1.
To list all status information, type:
xstatus
Status is reported hierarchically beneath the status root. It is possible to reduce the amount of
information returned by xstatus by specifying a more detailed status command.
16.1.2.
To list all xstatus commands available at the root level type:
xstatus ?
16.1.3.
xstatus Calls
Returns information about all active calls on the system.
xstatus Calls Call <index>
Returns information about the specified call.
16.1.4.
xstatus Ethernet
Returns the currently active configuration of the Ethernet interface.
MacAddress
Speed
Listing all status information
Listing all status commands
Calls
Ethernet
Returns the MAC address of the LAN 1 interface.
Returns the speed of the Ethernet link.
Reports Down if the link is down or not connected.
TANDBERG Gatekeeper User Guide
Page 68 of 105