Line Hunt Groups - Talkswitch 48-CVA Installation And User Manual

Busy Forwarding Options:
This section allows you to configure how inbound calls are handled for each port
when it is busy. You can click 'Assign ports' to assign ports for busy forwarding
when the port associated to this phone number is busy. This feature is similar to
the phone company's Rollover/Busy Forwarding service. By default this feature is
enabled so that the maximum number of inbound calls can be handled by the
system at any one time.

3.3.1.6 Line Hunt Groups

There are a total of 9 Line Hunt Groups for controlling outbound call line selections.
These Line Hunt Groups are used by the Local and Remote Extensions, and when
using the Call Bridge feature. Each Hunt Group can support several line choices and
will attempt to grab an available line in the order that they are listed (Lines to hunt)
for that Hunt group. These settings have no effect on incoming calls.
Default setup:
Hunt Group 9:
Hunt Group 81:
Hunt Group 82:
Hunt Group 83:
Hunt Group 84:
Hunt Group 88:
First select a Line Hunt Group then enter a useful name for identifying this hunt
group elsewhere in the configuration software.
Under Set Line Hunt Group, select the Line Type. If you wish to use this hunt group
3.0
selects any available telephone line
selects telephone Line 1
selects telephone Line 2
selects telephone Line 3
selects telephone Line 4
selects any available VoIP line
Configuring TalkSwitch 29