Talkswitch 48-CVA Installation And User Manual page 125

Touch-tone features dialed from a Local Extension.
Command Function performed
1x1-1x8 Intercoms a Local Extension
2x1-2x8 Dials a Remote Extension (associated
with an external phone number).
250-299 Speed dial for VoIP calls. TalkSwitch will
hunt the VoIP ports, go off hook then
dial the digits entered.
300-309
Dials an Extension Ring Group. 10 in
total for the entire system. Mapped to
local extension(s), with specific fall
through options.
<flash> if
Puts caller on hold.
connected to a
caller
<flash> at
It retrieves the most recent caller put on
internal dialtone
hold.
<flash> at
Switches to internal dialtone. Used
external dialtone
mainly when an extension has Direct
Line Access enabled.
1x1-1x8
Dials into a local ext. voice mailbox.
2x1-2x8
Dials into a remote ext. voice mailbox.
4x0-4x9
Dials into a general ext. voice mailbox.
1x1-1x8
Internal voicemail retrieval/access.
2x1-2x8
4x0-4x9 ated to that extension.
Completes a transfer and returns to
<flash>4
internal dialtone
External P .A. Access
0
120
TalkSwitch User Manual
accesses the mailbox associ-
Notes
x represents the Unit ID
x represents the Unit ID
After putting a caller on hold, you receive
internal dialtone.
To retrieve the caller on hold for the most
time, dial 7 at internal dialtone
To transfer a caller to a mailbox, press
'flash' to place a call on hold, then
1x8, 2x1-2x8, or 4x0-4x9 and
hang up.
x represents the Unit ID
To retrieve voicemail.
x represents the Unit ID
Action performed after putting a caller on
Hold then dialing an indented destination.
To make an announcement through the
attached external P .A. system.
Networked
Networked
1x1-
Networked
Networked