Talkswitch 48-CVA Installation And User Manual page 126

Hybrid pstn/voip phone system
Hide thumbs Also See for 48-CVA:
Table of Contents

Advertisement

Command
Function performed
<flash>5
Disconnects current caller and
reconnects immediately to the last
caller put on hold.
Call Parking Spaces - 10 in total for
500-509
the entire system.
500-509
Parked Call Retrieval
<flash>6
Conference Call for 3 parties.
Enables 'Do Not Disturb' at the
61
current extension
60
Disables 'Do Not Disturb' at the
current extension.
7 and 1xx
Call Pick up - Extension Specific
<flash>7
Hold Retrieve - used for retrieving any
calls placed on hold at that extension.
80
Accesses Same Line Connect when
transferring an outside caller to
another outside number.
81-88, 9
Line Hunt Groups used to access a
line.
80
Play music source through PA output
9
Call Pick up
Enters command mode
If you have Direct Line Access enabled at your Local Extension, then you must first press 'flash'
before using most of the functions listed.
Notes
Press 'flash' to place a call on hold, then assign
a parking space
500-509.
To pick up a parked call.
Press 'flash' to put the first caller on hold, dial
another extension or external number, then
press 'flash' 6.
User will hear confirmation. Reminder is played
every time the extension is picked up.
User will hear confirmation.
To pick up a call ringing at another extension at
anytime including after the Auto Attendant
answers.
Or press 'flash,' then 7 to cycle through on a
first in / first out basis.
Put the caller on Hold, dial 80, and then dial
the outside number. Hang up to complete the
transfer. Can only be used when the line has
3-Way Calling/Conference or Transfer
(Centrex/Plexar) service.
To toggle on or off music through the PA port.
Useful for office background music.
To pick up a call ringing at any other extension.
Appendices
121

Advertisement

Table of Contents
loading

Table of Contents