Talkswitch 48-CVA Installation And User Manual page 100

Hybrid pstn/voip phone system
Hide thumbs Also See for 48-CVA:
Table of Contents

Advertisement

To access a mailbox to retrieve messages, or to change mailbox options, dial
from a Local Extension or
if dialing from an outside location (or a local extension). Local extensions can also
transfer internal calls to voicemail by pressing 'flash' then dialing
mailbox number. If you have Direct Line Access enabled, be sure to press 'flash'
before trying to access your mailbox.
If you have a line configured to go straight to voicemail, dial '8' during the greeting to
access messages from outside phones.
The first time you access your voicemail, you will be prompted to set up your mailbox
by assigning a password (optional), recording a greeting and recording your name
for the dial-by-name directory. Since there are no directory listings for the general
mailboxes, you will not be prompted to record a name for them. If you wish to have
your name in the company directory, you should always use the mailbox associated
to its extension, since the directory is related to the extension and its mailbox.
Once your mailbox has been setup and you access it, through prompt instructions
you may do the following:
Listen to messages (press 1):
If there are any messages in your mailbox, you can access them by pressing 1.
TalkSwitch will always start with new messages before playing back any older
messages. You can perform the following actions during or after the message:
Dial 1:
Dial 11:
Dial 3:
Dial 33:
Dial 6:
Dial 7:
Dial 9:
Dial
Dial
Change greeting options (press 2):
This section allows you to record a new personal voicemail greeting. The
default greeting is "The extension you have reached is unavailable at this
time. Please leave a message after the tone".
92
TalkSwitch User Manual
and the mailbox number at the Auto Attendant
Rewind 10 seconds
Rewind to beginning of message
Skip ahead 10 seconds
Skip to end of message
Forward the message (with or without a note)
Delete message
Save message
Back up one level
:
Skip to next message – This leaves new messages as new.
:
and the

Advertisement

Table of Contents
loading

Table of Contents