Ip Configuration - Talkswitch 48-CVA Installation And User Manual

3.3.1.2 IP Configuration

In order for the TalkSwitch 48-CVA to function properly, an IP address and other
pertinent information is required.
In the "System IP Settings" section:
If you have a DHCP server and your TalkSwitch unit(s) are connected to the
LAN, then all fields should already be filled with the correct information. If
there is no DHCP server present, the following fields need to be filled in if you
plan on using the VoIP capabilites of the TalkSwitch 48-CVA.
Box X IP Address:
Assign an available static IP address to each TalkSwitch unit. If you use a DHCP
server, you need to reserve an IP address for each TalkSwitch unit. To reserve an
IP address, you will need the MAC address of each unit. See the begining of
section 3.3 for details on checking the MAC address.
Subnet Mask:
Enter the subnet mask for the LAN. If you have a DHCP server running, then this
information will automatically be obtained.
22 TalkSwitch User Manual