Symmetricom SyncServer S100 User Manual page 56

Test Results dialog
This screen shows whether the IRIG-B for your S100 failed or passed. In this example, the
IRIG-B failed.
There is no output to the "Mail test" field as no addresses had been provided in the System
Information dialog
Click Finish.
Setup Complete dialog
This screen verifies your configuration of the S100:
• Its time source
• Modem phone number (if you designated dial-up as the backup source for time)
• Host name
• System location
• Administrator e-mail
48
Figure 3-37: Test Results shown
(Figure 3-35).
Figure 3-38: Your IRIG set-up is complete
SyncServer S100
S100 User Guide – Rev. D – June 2005