Table of Contents
Advertisement
im Vertrieb von
Web Operation
Web Operation, cont'd
The Matrix 12800 can be controlled and operated through the Ethernet port on
BME 0, across the LAN or WAN, using a Web browser, such as Microsoft's Internet
Explorer. The browser down loads a series of displays that have the appearance of
Web pages. This chapter describes the factory-installed HTML pages, which are
always available and cannot be erased or overwritten.
Download the Startup Page
Access the switcher using the HTML pages as follows:
1.
2.
3.
4.
5.
Figure 5-1 — Enter Network Password page
6.
www.camboard.de
5-2
Matrix 12800 Switchers • Web Operation
CAMBOARD Electronics
Start the Web browser program.
Click in the browser's Address field.
Enter the switcher's IP address in the browser's Address field.
If the local system administrators have not changed the value, the factory-
specified default, 192.168.254.254, is the correct value for this field.
If you want the browser to display a page other than the default page (such as
a custom page that you have created and uploaded), enter a slash (/) and the
file name to open.
The browser's Address field should display the address in the following format:
xxx.xxx.xxx.xxx/{optional_file_name.html}
The following characters are invalid in file names: {space} ~ @ = ' [ ] { }
< > ' " ; : | \ and ?.
Press the keyboard Enter key. The switcher checks to see if it is password
protected.
If the switcher is not password protected, proceed to step 7.
If the switcher is password protected, the switcher downloads the Enter
Network Password page (figure 5-1).
A User Name entry is not required.
Click in the Password field and type in the appropriate administrator or user
password. Click the OK button.
Tel. 07131 911201
Fax 07131 911203
ce-info@camboard.de
Advertisement
Table of Contents
