Host-To-Switcher Instructions; Switcher-Initiated Messages - Extron electronics Matrix 12800 Series User Manual

Wideband, video, sync, or audio switchers
Hide thumbs Also See for Matrix 12800 Series:
Table of Contents

Advertisement

im Vertrieb von

Host-to-Switcher Instructions

Switcher-Initiated Messages

www.camboard.de
CAMBOARD Electronics
Side
Clip Down
Pins
1
2 3 4 5 6 7 8
1
2 3 4 5 6 7 8
1&2
7&8
3&6 4&5
Figure 4-2 — RJ-45 connector pinout table
The switcher accepts7 commands through the either of its RS-232/RS-422 ports or
its Ethernet port. SIS commands consist of one or more characters per command
field. They do not require any special characters to begin or end the command
character sequence. Each switcher response to an SIS command ends with a
carriage return and a line feed (CR/LF =
character string. A string is one or more characters.
When a local event such as power-up or a front panel operation occurs, the
switcher responds by sending a message to the host. The switcher-initiated
messages are listed below (underlined).
(C) Copyright 2003, Extron Electronics Matrix12800, Vx.xx,date/time,
The copyright message is initiated by the switcher when it is first powered on.
Vx.xx is the firmware version number.
Password:
The switcher initiates the password message immediately after the copyright
message when the controlling system is connected using TCP/IP or Telnet and the
switcher is password protected. This message means that the switcher requires an
administrator or user level password before it will perform the commands entered
via this link. The switcher repeats the password message response for every entry
other than a valid password until a valid password is entered.
Tel. 07131 911201
Matrix 12800 Switchers • Programmer's Guide
Fax 07131 911203
Patch (straight) cable
Side 1
Pin
Wire color
1
White-orange
2
Orange
RJ-45
3
White-green
connector
4
Blue
5
White-blue
6
Green
7
White-brown
8
Brown
Crossover cable
Side 1
Pin
Wire color
1
White-orange
Twisted
2
Orange
Pairs
3
White-green
4
Blue
5
White-blue
6
Green
7
White-brown
8
Brown
), which signals the end of the response
ce-info@camboard.de
Side 2
Pin
Wire color
1
White-orange
2
Orange
3
White-green
4
Blue
5
White-blue
6
Green
7
White-brown
8
Brown
Side 2
Pin
Wire color
1
White-green
2
Green
3
White-orange
4
Blue
5
White-blue
6
Orange
7
White-brown
8
Brown
4-3

Advertisement

Table of Contents
loading

Table of Contents