Compaq SLT 386s/20 Maintenance And Service Manual page 33

1719 - 09 Failed to format a track
1719 - 10 Failed sector wrap test
1719 - 19 Controller failed to
deallocate bad sector
------------------------------------------------------------------------------
Error
Code Description
------------------------------------------------------------------------------
1719 - 40 Failed cylinder 0
1719 - 41 Drive not ready
1719 - 42 Recalibrate failed
1719 - 43 Failed to format bad track
1719 - 44 Failed fixed disk controller
diagnostics
1719 - 45 Failed to get drive
parameters from ROM
1719 - 46 Invalid drive parameters
found in ROM
1719 - 47 Failed to park heads
1719 - 48 Failed to move disk table
to RAM
1719 - 49 Failed to read media in
file write test
------------------------------------------------------------------------------
Error
Code Description
------------------------------------------------------------------------------
1719 - 50 Failed file I/O write test
1719 - 51 Failed file I/O read test
1719 - 52 Failed file I/O compare test
1719 - 53 Failed drive/head register
test
1719 - 54 Failed digital input register
test
1719 - 55 Failed cylinder 1
1719 - 56 Fixed disk drive controller
Recommended Action
The following steps apply to error
codes 1700 - xx through 1799 - xx:
1. Replace the fixed disk drive
signal and power cables and
retest.
2. Replace the fixed disk drive and
retest.
3. Replace the system board and
retest.
Recommended Action
The following steps apply to error
codes 1700 - xx through 1799 - xx:
1. Replace the fixed disk drive
signal and power cables and
retest.
2. Replace the fixed disk drive and
retest.
3. Replace the system board and
retest.