Compaq SLT 386s/20 Maintenance And Service Manual page 24

echo test failed
301 - 04 Keyboard short test
302 - 01 Keyboard long test failed.
303 - 01 Keyboard LED test,
8042 self test failed
303 - 02 Keyboard LED test,
reset test failed
303 - 03 Keyboard LED test,
reset test failed
------------------------------------------------------------------------------
Error
Code Description
------------------------------------------------------------------------------
303 - 04 Keyboard LED test,
LED command test failed
303 - 05 Keyboard LED test,
LED command test failed
303 - 06 Keyboard LED test,
LED command test failed
303 - 07 Keyboard LED test,
LED command test failed
303 - 08 Keyboard LED test,
command byte restore
test failed
303 - 09 Keyboard LED test,
LEDs failed to light
304 - 01 Keyboard typematic test
failed
304 - 02 Unable to enter mode 3
304 - 03 Incorrect scan code from
keyboard
304 - 04 No make code observed
304 - 05 Unable to disable typematic
feature
304 - 06 Unable to return to normal mode
==============================================================================
Table 3-5. Parallel Printer Test Error Codes
keyboard.
2. Replace the keyboard and retest.
3. Replace the system board and
retest.
Recommended Action
The following steps apply
to error codes 301 - xx through
304 - xx:
1. Check the keyboard connection.
If disconnected, turn off the
computer and connect the
keyboard.
2. Replace the keyboard and retest.
3. Replace the system board and
retest.