Compaq SLT 386s/20 Maintenance And Service Manual page 30

1202 - 01 Modem timed out waiting for SYNC
(local loopback mode)
1202 - 02 Modem timed out waiting for
response (local loopback mode)
1202 - 03 Modem exceeded data block retry
limit (local loopback mode)
1202 - 11 Modem timed out waiting for SYNC
(analog loopback originate mode)
1202 - 12 Modem timed out waiting for modem
response (analog loopback originate
mode)
------------------------------------------------------------------------------
Error
Code Description
------------------------------------------------------------------------------
1202 - 13 Modem exceeded data block
retry limit (analog loopback
originate mode)
1202 - 21 Modem timed out waiting
for SYNC (analog loopback
answer mode)
1202 - 22 Modem timed out waiting
for modem response
(analog loopback answer mode)
1202 - 23 Modem exceeded data block
retry limit (analog loopback
answer mode)
1203 - xx Modem External Termination Test
1203 - 01 Modem external TIP/RING failure
1203 - 02 Modem external DATA TIP/RING
failure
1203 - 03 Modem line termination failure
1204 - xx Modem Auto Originate Test
1205 - xx Modem Auto Answer Test
1206 - xx Dial Multifrequency Tone Test
------------------------------------------------------------------------------
Error
Code Description
------------------------------------------------------------------------------
1210 - xx Modem Direct Connect Test
Recommended Action
The following steps apply to error
codes 1201 - xx through 1210 - xx:
1. Refer to the modem documentation
for SETUP procedures.
2. Check the modem line.
3. Replace the modem and retest.
Recommended Action
The following steps apply to error
codes 1201 - xx through 1210 - xx: