Conversion From Water Mains To Tank 2Gr Version - Wega Mininova Use And Maintenance Manual For The Technician

3.7
Conversion from WATER MAINS to TANK
2GR Version
Through this procedure you can change the type
of water supply of the machine, from Water Mains to
internal Tank.
All operations must be performed by technical
personnel only.
• Unplug the machine from the power supply.
• close the tap (D) and disconnect the hose from the
water supply;
• unhook the hose (C) from the quick coupling placed
under the machine;
• insert the knob (B) fitted under the machine and
turn it counterclockwise (machine seen from below),
all the way down, so that its direction is as shown in
the picture;
• remove the knob and keep it for any future interven-
tion;
• remove the screws and the top cover of the machine;
• set switch (A) placed on the left side of the machine
to "0";
• replace the top cover of the machine using the screws;
• fill the internal tank with potable water;
• connect the cable to the power supply and turn on
the machine.
22
2
5
2
A
A
MAX
B
D
Q
C
C