Conversion From Tank To Water Mains 2Gr Version - Wega Mininova Use And Maintenance Manual For The Technician

3.6 Conversion from TANK to WATER MAINS
2GR Version
Through this procedure you can change the type
of water supply of the machine, from internal Tank to
Water Mains.
All operations must be performed by technical
personnel only.
• Unplug the machine from the power supply.
• remove the screws and the top cover of the machine;
• set switch (A) placed on the left side of the machine
to "1";
• replace the top cover of the machine using the screws;
• insert the knob (B) fitted under the machine and turn
it clockwise (machine seen from below), all the way
down, so that its direction is as shown in the picture;
• remove the knob and keep it for any future interven-
tion;
• hook the hose (C) supplied to the quick coupling
placed under the machine;
• connect the hose to the water supply and open the
tap (D), make sure that the system pressure is about
1 bar;
• connect the cable to the power supply and turn on
the machine.
Technical manual
2
5
2
A
A
MAX
B
D
ROSSO
C:0 M:100 Y:100 K:0
NERO
C:0 M:0 Y:0 K:100
VERDE
C:100 M:0 Y:100 K:0
Q
C
C
21