Conversion From Tank To Water Mains 1Gr Version - Wega Mininova Use And Maintenance Manual For The Technician

3.4 Conversion from TANK to WATER MAINS
1GR Version
Through this procedure you can change the type
of water supply of the machine, from internal Tank to
Water Mains.
All operations must be performed by technical
personnel only.
• Unplug the machine from the power supply.
• remove the water tank;
• remove the screws, and then remove the top cover
and the body of the machine;
• set switch (A) placed on the right side of the machine
to "0";
• turn the knob (B) clockwise to end of stroke, so that
its direction is the one shown in the picture;
• replace the body of the machine using the screws;
• replace the water tank;
• hook the hose (C) supplied to the quick coupling
placed under the machine;
• connect the hose to the water supply and open the
tap (D), make sure that the system pressure is about
1 bar;
• connect the cable to the power supply and turn on
the machine.
Technical manual
A
B
C
ROSSO
C:0 M:100 Y:100 K:0
NERO
C:0 M:0 Y:0 K:100
VERDE
C:100 M:0 Y:100 K:0
A
D C
19