Suzuki XL7 Owner's Manual page 142

If playing a CD-R, the sound quality may
be reduced due to CD-R quality, the
method of recording, the quality of the
music that has been recorded, and the way
the CD-R has been handled. There may be
an increase in skipping, difficulty in finding
tracks, and/or difficulty in loading and
ejecting. If these problems occur, check
the bottom surface of the CD. If the surface
of the CD is damaged, such as cracked,
broken, or scratched, the CD will not play
properly. If the surface of the CD is soiled,
refer to "Care of Your CDs and DVDs" in
this section "Care of Your CDs and DVDs"
for more information.
If there is no apparent damage, try a
known good CD.
CAUTION
If a label is added to a CD, or more
than one CD is inserted into the slot
at a time, or an attempt is made to
play scratched or damaged CDs, the
CD player could be damaged. While
using the CD player, use only CDs in
good condition without any label,
load one CD at a time, and keep the
CD player and the loading slot free of
foreign materials, liquids, and debris.
Do not add any label to a CD, it could get
caught in the CD player. If a CD is
recorded on a personal computer and a
description label is needed, try labeling the
top of the recorded CD with a soft marker
pen.
If an error appears on the display, see "CD
Messages" later in this section.
EJECT:
Press the CD eject button to eject CD-R(s).
To eject the CD-R that is currently playing,
press and release this button. A beep
sounds and Ejecting Disc displays. Once
the disc is ejected, Remove Disc displays.
The CD-R can be removed. If the CD-R is
not removed, after several seconds, the
CD-R automatically pulls back into the
player and begins playing.
(Tune):
Turn this knob to select MP3 files on the
CD-R currently playing.
SEEK :
Press the left SEEK arrow to go to the start
of the current MP3 file, if more than ten
seconds have played. Press the right
SEEK arrow to go to the next MP3 file. If
either SEEK arrow is held or pressed multi-
ple times, the player continues moving
backward or forward through MP3 files on
the CD.
(Previous Folder):
Press the pushbutton positioned under the
Folder label to go to the first track in the
previous folder.
INSTRUMENT PANEL
(Next Folder):
Press the pushbutton positioned under the
Folder label to go to the first track in the
next folder.
REV (Reverse):
Press and hold this button to reverse play-
back quickly within an MP3 file. You will
hear sound at a reduced volume. Release
this button to resume playing the file. The
elapsed time of the file appears on the dis-
play.
FWD (Fast Forward):
Press and hold this button to advance play-
back quickly within an MP3 file. You will
hear sound at a reduced volume. Release
this button to resume playing the file. The
elapsed time of the file appears on the dis-
play.
RDM (Random):
With random, you can listen to MP3 files
on the CD-R in random, rather than
sequential order. To use random, press the
pushbutton positioned under the RDM
label until Random Current Disc displays.
Press the same pushbutton again to turn
off random play.
(Music Navigator):
Use the music navigator feature to play
MP3 files on the CD-R in order by artist or
album. Press the pushbutton located
below the music navigator label. The
player scans the disc to sort the files by
artist and album ID3 tag information. It may
take several minutes to scan the disc
3-60