Removing the Flat Tire and Installing
the Spare Tire
1) Use the wheel wrench to loosen all the
wheel nuts. Do not remove them yet.
2) Attach the wheel wrench to the jack bolt
head and rotate the wheel wrench
clockwise. That will raise the lift head a
little.
3) Place the jack near the flat tire.
CAUTION
Make sure that the jack lift head is in
the correct position or you may dam-
age your vehicle. The repairs would
not be covered by your warranty.
4) Find the arrow on the plastic lower body
809981
panel. Position the jack head under the
metal jacking flange and not the plastic
lower body panel.
SERVICE AND APPEARANCE CARE
1399879
With the jack head positioned correctly
on the metal jacking flange, it should
look like this from underneath.
Do not lift the vehicle using the plastic
lower body panel.
1587905
1587906
5-40