Suzuki XL7 Owner's Manual page 135

Suzuki automobile owner's manual
Hide thumbs Also See for XL7:
Table of Contents

Advertisement

INSTRUMENT PANEL
of recording, the quality of the music that
has been recorded, and the way the CD-R
has been handled. There can be an
increase in skipping, difficulty in finding
tracks, and/or difficulty in loading and
ejecting. If these problems occur, check
the bottom surface of the CD. If the surface
of the CD is damaged, such as cracked,
broken, or scratched, the CD will not play
properly. If the surface of the CD is soiled,
refer to "Care of Your CDs and DVDs" in
this section for more information.
If there is no apparent damage, try a
known good CD.
CAUTION
If a label is added to a CD, or more
than one CD is inserted into the slot
at a time, or an attempt is made to
play scratched or damaged CDs, the
CD player could be damaged. While
using the CD player, use only CDs in
good condition without any label,
load one CD at a time, and keep the
CD player and the loading slot free of
foreign materials, liquids, and debris.
Do not add any label to a CD. It could get
caught in the CD player. If a CD is
recorded on a personal computer and a
description label is needed, try labeling the
top of the recorded CD with a marking pen.
If an error displays, see "CD Messages"
later in this section.
3-53
CD (Eject):
Press and release the CD eject button to
eject the CD that is currently playing in the
bottom slot. A beep sounds and Ejecting
Disc displays. Once the disc is ejected,
Remove Disc displays. The CD can be
removed. If the CD is not removed, after
several seconds, the CD automatically
pulls back into the player.
If loading and reading of a CD cannot be
completed, such as unknown format, etc.,
and the disc fails to eject, press and hold
the DVD eject button for more than five
seconds to force the disc to eject.
DVD (Eject):
Press and release the DVD eject button to
eject the CD that is currently playing in the
bottom slot. A beep sounds and Ejecting
Disc displays. Once the disc is ejected,
Remove Disc displays. The CD can be
removed. If the CD is not removed, after
several seconds, the CD automatically
pulls back into the player.
If loading and reading of a CD cannot be
completed, such as unknown format, etc.,
and the disc fails to eject, press and hold
the DVD eject button for more than five
seconds to force the disc to eject.
(Tune):
Turn this knob to select tracks on the CD
that is currently playing.
SEEK
:
Press the left SEEK arrow to go to the start
of the current track, if more than five sec-
onds on the CD have played. If less than
five seconds on the CD have played, the
previous track plays. Press the right SEEK
arrow to go to the next track. If either SEEK
arrow is held, or pressed multiple times,
the player continues moving backward or
forward through the tracks on the CD.
REV (Reverse):
Press and hold this button to reverse play-
back quickly within a track. Sound is heard
at a reduced volume. Release this push-
button to resume playing the track. The
elapsed time of the track displays.
FWD (Fast Forward):
Press and hold this button to advance play-
back quickly within a track. Sound is heard
at a reduced volume. Release this button
to resume playing the track. The elapsed
time of the track displays.
RDM (Random):
With random, tracks can be listened to in
random, rather than sequential order. To
play the tracks from the CD, press the
DVD/CD AUX button when not sourced to
the CD, or insert a disc partway into the
slot. A RDM label displays. Press the
pushbutton positioned under the RDM
label until Random Current Disc displays.
Press the pushbutton again to turn off ran-
dom play.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2009 xl72007 xl7Xl7 2006

Table of Contents