Distance Intervals - Suunto T6 User Manual

Wristop personal trainer with heart rate monitor

Hide thumbs Also See for T6:

Table of Contents

3.5.4. Distance intervals

NOTE: Distance interval 1 can be set to alert in a range between 0.1 and 9.9. For dis-

tance interval 2 the range is between 0.0 and 9.9.

NOTE: After distance interval 1 has been completed, your Suunto t6 automatically

switches to distance interval 2. If distance interval 2 is set to zero, it goes back to dis-

tance interval 1.

NOTE: When a timer or Autolap is on, Suunto t6 stores information to the log accord-

ing to the settings that were valid when you activated the stopwatch. If you adjust the

settings after activating the stopwatch, Suunto t6 will still use the old settings. The

new settings will only come to effect after you reset the stopwatch and start it again.

With this function you can set distance intervals for

interval training. After the stopwatch is started, the

Suunto t6 alerts and records lap times and other data

after every completed interval. If distance intervals are

active, number

the SPD/DST mode display. Refer to chapter 4 for more

information on distance intervals.

To set distance intervals:

1.In the Speed/Distance menu, scroll to Interval and

press ENTER.

2.Press UP/DOWN to select On. Press ENTER.

3.Set the first interval with UP/DOWN and press ENTER.

4.Set the second interval and so on.

is displayed on the right hand side of

Table of Contents