single training session. They are set with the Suunto Training Manager PC software in
the t6 settings History tab of the Properties window.
To reset history information:
1. In the Training menu, scroll to History and press ENTER.
2. Select Reset. Your Suunto t6 displays the message '
3. Press ENTER to confirm the history reset. Press ALT/BACK to return without
resetting the history.
3.4.7. Pair
With this function you can pair the Suunto t6 with the transmitter belt, a wireless
speed and distance sensor or both.
Transmitter belt
To pair the transmitter belt:
1. Remove the battery from the transmitter belt.
2. Short-circuit the - and + metal plates in the battery compartment by connecting
them with a metal instrument.
3. Select Pair in the Training menu of your Suunto t6.
4. Select Hr belt. The message '
5. Insert the battery in the battery compartment and wait for acknowledgement. Within
30 seconds either '
displayed.
6. If pairing is successful, close the battery compartment cover. If pairing fails and no
devices can be found, remove the battery and repeat steps 2-6.
Removing the battery, short-circuiting the transmitter belt and putting the battery back
again activates the ID transmission of the transmitter belt.
TURN ON NEW DEVICE
PAIRING COMPLETE
RESET HISTORY
' is displayed.
', or, if pairing failed, '
?'.
NO DEVICES FOUND
' is
47