Table of Contents
Advertisement
NIC1
!
NIC1:
Indicates network activity on LAN1 when flashing.
!
HDD: Indicates IDE channel activity. On the SuperServer 6012P-6,
this LED indicates CD-ROM drive activity when flashing.
!
Power:
supply units. This LED should normally be illuminated when the system is
operating.
3-4
SCSI Drive Carrier LEDs
Each SCSI drive carrier has two LEDs.
!
Green: When illuminated, the green LED on the front of a SCSI drive
carrier indicates drive activity.
enables this LED to blink on and off when that particular drive is being
accessed.
!
Red: A SAF-TE compliant backplane (standard on the 6012P-6) acti-
vates the red LED, which indicates a drive failure. If one of the SCSI drives
fail, you should be notified by your system management software. Please
refer to Chapter 6 for instructions on replacing failed SCSI drives.
Indicates power is being supplied to the system's power
A connection to the SCSI SCA backplane
Chapter 3: System Interface
3-3
Advertisement
Table of Contents
