Table of Contents
Advertisement
Advanced Motherboard Setup
This chapter covers the steps required to install processors and heatsinks to the
P4DPR-6GM+ motherboard, connect the data and power cables and install add-
on cards. All motherboard jumpers and connections are also described. A
layout and quick reference chart are also included in this chapter. Remember
to close the chassis completely when you have finished working on the
motherboard to protect and cool the system sufficiently.
5-1
Handling the P4DPR-6GM+ Motherboard
Static electrical discharge can damage electronic components. To prevent
damage to printed circuit boards, it is important to handle them very care-
fully (see Chapter 4).
board can cause it to bend if handled improperly, which may result in dam-
age. To prevent the motherboard from bending, keep one hand under the
center of the board to support it when handling.
are generally sufficient to protect your equipment from static discharge.
Precautions
• Use a grounded wrist strap designed to prevent static discharge.
• Touch a grounded metal object before removing any board from its anti-
static bag.
• Handle a board by its edges only; do not touch its components, periph-
eral chips, memory modules or gold contacts.
• When handling chips or modules, avoid touching their pins.
• Put the motherboard, add-on cards and peripherals back into their anti-
static bags when not in use.
Unpacking
The motherboard is shipped in antistatic packaging to avoid static damage.
When unpacking the board, make sure the person handling it is static pro-
tected.
Chapter 5: Advanced Motherboard Setup
Chapter 5
Also note that the size and weight of the mother-
5-1
The following measures
Advertisement
Table of Contents
