Table of Contents
Advertisement
S
UPERSERVER 6012P-6 User's Manual
Thermal Fan Enable/Disable
JP38 allows you to enable or disable
the thermal fan. When enabled, the
fan will operate continuously. When
disabled, it will operate only when a
predefined temperature threshold
has been exceeded.
on the right for jumper settings.
PCI-X Bus Speed Settings
Jumpers JP10 through JP15 are
used to set the speed for the PCI-X
buses. See the tables on the right
for the jumper settings to select the
speed for each slot.
Speaker Enable/Disable
On the JD1 header, add a jumper
to pins 6-7 to enable the onboard
speaker.
If you wish to use an
external speaker, remove it to dis-
able the onboard speaker.
5-10 Onboard Indicators
LAN1/LAN2 LEDs
The Ethernet ports (located beside
the VGA port) have two LEDs.
See the tables below for the func-
tions associated with these LEDs.
On the Gb LAN port, the yellow
LED indicates activity while the
other LED may be green, orange
or off to indicate the speed of the
connection. See the tables below
for descriptions.
See the table
5-20
T hermal Fan
Enable/Disable
Jumper Settings (JP38)
Jumper
Position
Definition
Open
Disabled
Closed
Enabled
PC Slot 1 Bus Speed Settings
(JP13, JP14, JP15)
Mode
JP14
PCI-X 133 MHz
Off
PCI-X 100 MHz
Off
PCI-X 66 MHz
Off
PCI 66 M Hz
Off
PCI Slot 2 Bus Speed Settings
(JP10, JP11, JP12)
Mode
JP10
PCI-X 66 MHz
Off
PCI 66 M Hz
Off
100 Mb LAN LED
Indicators (LAN1)
LED
Color
Definition
Green
Connected
Yellow
Active
1 Gb LAN Right LED
Indicator (LAN2)*
LED
Color
Definition
Off
No Connection
Green
100 MHz
Orange
1 GHz
JP15
JP13
Off
Off
On
Off
On
Pins 1-2
On
Pins 2-3
JP11
JP12
On
Pins 1-2
On
Pins 2-3
Advertisement
Table of Contents
