Optional Equipment; Disposal; Ec Declaration Of Conformity; Electromagnetic Compatibility (Emc) - RIDGID RP 240 Manual

Optional Equipment

WARNING
To reduce the risk of serious injury, only
use equipment specifically designed and
recommended for use with the RIDGID
RP 240 Press Tool, such as listed below.
RP 240 Press Tool
Battery Packs
Catalog
No. Model
55183 RB-1225
Battery will work with any catalog number RBC-121 Battery
Charger.
RBC-121 Chargers and Cords
Catalog
No.
55193 Charger USA, Canada and Mexico
55198 Charger
55203 Charger
55208 Charger Australia & Latin America
55213 Charger
55218 Charger
44798 Charger Cord
44808 Charger Cord
44803 Charger Cord
44813 Charger Cord
44818 Charger Cord
44828 Charger Cord
Ridge Tool Company provides Compact series
press attachments designed specifically for
use with RIDGID Compact Press Tools. Only
use attachments that are specifically designed
to press the fitting system you are installing.
For a complete listing of RIDGID equipment
available for these tools, see the Ridge Tool
Catalog online at RIDGID.com or see Contact
Information.

Disposal

Parts of these tools contain valuable materials
and can be recycled. There are companies
that specialize in recycling that may be found
locally. Dispose of the components in compli-
ance with all applicable regulations. Contact
your local waste management authority for
more information.
999-995-112.08_REV. A
Capacity
12V 2.5Ah Li-Ion
Plug
Region Type
A
Europe C
China A
Japan A
United Kingdom G
North America A
Europe C
China A
Australia & LA
Japan A
United Kingdom G
For EC Countries: Do not dispose
of elec trical equipment with house-
hold waste!
According to the European Guide -
line 2012/ 19/EU for Waste Elec trical
and Electronic Equipment and its
imple men tation into national legislation, elec-
trical equipment that is no longer usable must
be collected separately and disposed of in
an environmentally correct manner.
EC Declaration of
Conformity
The EC Declaration of Conformity (890-011-
320.10) will accompany this manual as a sep-
arate booklet when required.
Electromagnetic
Compatibility (EMC)
The term electromagnetic compatibility is
taken to mean the capability of the product to
function smoothly in an environment where
electromagnetic radiation and electrostatic
discharges are present and without causing
electromagnet interference to other equip-
I
ment.
These tools conform to all applicable
NOTI E
EMC standards. However, the possibility of
it causing interference in other devices cannot
be precluded. All EMC related standards that
have been tested are called out in the tool's
technical document.
I

FCC/ISED Statement

This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions:
1. This device may not cause harmful inter-
ference.
2. This device must accept any interference
received, including interference that may
cause undesired operation.
Modifications not expressly approved by this
company could void the user's authority to
operate the equipment.
This equipment has been tested and found to
comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reason-
able protection against harmful interference in
a residential installation.
RP 240 Press Tool
11