Troubleshooting; Optional Equipment - RIDGID Standard Series Manual

RP 350/RP 351 Press Tools

Troubleshooting

SYMPTOM
Tool will not turn ON
when ON/OFF button is
pressed.
Attachment is locked
onto fitting.
The pressed connections
produced are not com-
plete.
Oil leaks from tool.
Motor runs but tool will
not complete a cycle.
Tool stops during
operation.
See Figure 5 – Tool Status Lights

Optional Equipment

WARNING
To reduce the risk of serious injury, only use equip-
ment specifically designed and recommended for
use with the RP 350 and RP 351 Press Tools, such
as listed below.
Battery and Adapter Packs
Catalog
No. Description
56513 RB-1825 18V 2.5 Ah Lithium Ion Battery
56518 RB-1850 18V 5.0 Ah Lithium Ion Battery
44468 120 AC Power Adapter – North America
43338 220 AC Power Adapter– Europe
44823 120 AC Power Adapter – China
12
POSSIBLE REASONS
Battery is completely discharged or battery has
failed.
Battery not properly inserted into handle of tool
AC adapter not correctly inserted into the tool.
Press connection was not successfully completed.
Used wrong jaw for the tube size or material.
The tool was not square to the tube.
Attachment press contour was not aligned with
the fitting contour.
Tool is in need of repair.
Seal or mechanical problems.
Oil level low.
Oil level low.
Insert fully charged battery/recharge battery.
Check to assure battery is fully inserted.
Correctly insert AC adapter into tool.
Push pressure release button to remove jaws from
fitting. Inspect and repress fitting.
Install the correct attachment.
Redo the press connection with new fitting and new
tube. Make sure that the tool is square to the tube.
Redo the joint with new tube and new fitting.
Make sure the attachment press contour is
aligned with the fitting contour.
Take for service.
Take for service.
Chargers and Cords
Catalog
No.
64383 RBC-30 Charger
56523 RBC-30 Charger
64388 RBC-30 Charger
64393 RBC-30 Charger
64378 RBC-30 Charger
64398 RBC-30 Charger
64173 RBC-30 Charger Cord
64183 RBC-30 Charger Cord
For a complete listing of RIDGID equipment available
for these tools, see the Ridge Tool Catalog online at
RIDGID.com or see Contact Information.
SOLUTION
Plug
Region Type
North America
Europe
China
Australia
Japan
United Kingdom
North America
Europe
999-995-220.10_REV. B
A
C
A
I
A
G
A
C