Installing Deskphones Through The Web Gui - Avaya E129 Installing And Maintaining

Sip deskphone

Hide thumbs Also See for E129:

Table of Contents

Troubleshooting

Installing deskphones through the Web GUI

Procedure

1. Connect the handset and the main case with the deskphone cord.

2. Connect the LAN port of the deskphone to the RJ45 socket of a hub, a switch, or a router

with the Ethernet cable and press the cable in the groove.

3. Attach the deskphone stand to the back of the deskphone.

4. If the switch to which you connected the deskphone is not a PoE switch, connect the 5-V DC

output plug to the power port on the deskphone and plug the power adapter into an electrical

outlet.

The deskphone screen displays various messages as the deskphone starts.

5. Press Menu > Network Config when the deskphone displays the Network Down message

and provide the IP details. For more information about providing IP details, see

details to the deskphone

6. When the deskphone displays the prompt to reboot, press the Yes softkey.

The deskphone displays Username.

7. Press Conference and note the IP address that the deskphone displays.

8. Enter the IP address of the deskphone in a web browser and press Enter.

9. Enter the administration password and click Login.

10. Click Maintenance > Upgrade and Provisioning.

11. Enter appropriate values for the Firmware Server Path and Config Server Path fields.

12. Click Save and Apply.

Result

The deskphone restarts and displays various messages.

Next steps

Make a test call to another extension.