Deskphone installation in the IP Office environment
For IP500 and IP500 V2 systems, each IP500 VCM 32 and IP500 VCM 64 card installed in the
system supports 12 Avaya IP endpoints without licenses.
Create deskphone users
For each deskphone, you must create a user entry and an extension entry in the system
configuration.
You must create users and extensions prior to connecting the deskphones to the network.
Adding and configuring deskphone users
Procedure
1. Receive the configuration from the system through IP Office Manager.
2.
Select
User.
3. Click
Create a New Record and select User.
4. Select the User tab.
5. In the Name field, enter the account name.
6. In the Extension field, enter an extension number. It is the user name that the deskphone
requests when the deskphone connects to the IP Office system.
7. Select the Telephony > Supervisor Settings tab.
8. In the Login Code field, enter a login code of at least 4 digits. It is the password that the
deskphone requests when the deskphone connects to the IP Office system.
9. Click OK.
10. If IP Office Manager prompts to create an extension, select SIP Extension, and click OK.
11. Repeat Step 1 to Step 10 to add more users.
Next steps
Add user extensions in the IP Office configuration.
Configuring user extensions
About this task
You must create a matching extension entry for each user that you create in the system
Installing and Maintaining Avaya E129 SIP Deskphone
16
Comments? infodev@avaya.com
March 2015