Connecting Deskphones To The System - Avaya E129 Installing And Maintaining

6. Click the Communication Profile tab.
7. Enter details for Communication Address, Session Manager Profile, CM Endpoint
Profile, and Messaging Profile. Configure the phone type as 9640SIP or 9641SIP, such
that the default template is Default_9640SIP_CM_6_3 or Default_9641SIP_CM_6_3.
8. Press Commit & Continue.

Connecting deskphones to the system

Procedure
1. Connect the handset and the main case with the deskphone cord.
2. Connect the LAN port of the deskphone to the RJ45 socket of a hub, a switch, or a router
with the Ethernet cable and press the cable in the groove.
3. Attach the deskphone stand to the back of the deskphone.
4. If the switch to which you connected the deskphone is not a PoE switch, connect the 5-V DC
output plug to the power port on the deskphone and plug the power adapter into an electrical
outlet.
The deskphone screen displays various messages as the deskphone starts.
5. When the deskphone displays Username, enter the user name that you created, and press
OK.
6. When the deskphone displays Password, enter the password for the user, press OK.
The deskphone displays Processing login message.
7. If the details are correct, the deskphone displays the normal idle display with NextScr and
Headset buttons.
If the deskphone does not recognize the details, the deskphone displays login failed
message and displays the Login screen again.
Next steps
When installation and testing of the deskphone is complete, secure the deskphone administration
control.
March 2015 Installing and Maintaining Avaya E129 SIP Deskphone
Comments? infodev@avaya.com
Connecting deskphones to the system
27