Table of Contents
Advertisement
About this task
IP Office system has two LAN interfaces, LAN1 and LAN2. On IP500 and IP500 V2 systems these
match the LAN and WAN ports respectively on the back of the control units. You can use both LAN1
and LAN2 to support SIP telephones.
Procedure
1. Receive the configuration from the system through IP Office Manager.
2.
Select
System.
3. Select the LAN1 or LAN2 tab depending on which of the LAN interfaces you want to use to
support SIP extensions. Note the IP Address settings for the LAN.
4. Select the VoIP tab.
5. Enter the required details and click OK.
March 2015
Preparing the IP Office system for SIP telephony
Installing and Maintaining Avaya E129 SIP Deskphone
Comments? infodev@avaya.com
19
Advertisement
Table of Contents
