Eaton QD5 Manual page 33

B. The reversing movable contact is located on the
reversing neutral stationary contact. See Figure 75.
Reversing
Neutral
Stationary
Contact
Figure 75. Neutral position for reversing movable.
C. The pinion cam is pointing to the right over the
holding switch actuator. See Figure 76.
Pinion Cam
Figure 76. Neutral position for position indicator pinion
cam and holding switch.
Reversing
Movable
Contact
Holding Switch
Actuator
QD5 QUIK-DRIVE TAP-CHANGER INSTALLATION AND MAINTENANCE INSTRUCTIONS MN225012EN March 2016 29